How to make Off-the-Shoulder Tee

To make Off-the-Shoulder Tee, you have to Start off with a slightly oversized T-shirt. You need to Fold it in half vertically with the front of the shirt facing outward, making sure that the sleeves are evenly aligned. You must Use a pen to mark the point on the collar where the shirt is folded. After that, Measure your neckline. Holding a tape measure at the base of your neck, you should measure from that point to a couple of inches below your shoulder on the opposite side.You can Round down by 1 or 2 centimeters and divide that number in half. Then, Lay the T-shirt flat on your working surface. Measure from the shoulder of your shirt (about 2 inches away from the collar) to the front center of the shirt. You can Mark the point where your measurement (divided by two) aligns with the original marking you made in the center of the collar. You have to Mark just above the tape measure at that point and at the starting point (0). Next, Cut the top layer of the shirt first. Making sure you are only cutting the top layer, need to make a circular cut from the shoulder to the center of the shirt where you made your mark. Now, you must make a horizontal cut at the starting point to release the collar and create a flap. Forth, Fold the collar flap over to the other side. You should Use it as a template to continue cutting the other side of the T-shirt. Again, you have to ensure you are only cutting the top layer of the T-shirt. After that, Cut the back of the shirt. For the back of the shirt, you can only cut along the hem of the collar. Then, Remove the hems. You have to Cut the hems off of each sleeve and the bottom of the T-shirt. Next, Pull the cut edges taut so that they curl over.